Impact Presses
Impact Presses  

Our Impact press gives consistent quality stroke after stroke

These impact press machines are useful in a wide range of applications such as Riveting, Eyeleting, Marking, Bending, Punching, Embossing, Button fixing, corner fitting, even Hot stamping (with suitable fixturing).

These impact press machines or riveting machines are ideal for quick riveting, numbering, bending, flaring, embossing, punching, shearing, stamping, button-fixing, eyeleting, corner fitting, stud fitting, hot-stamping and a host of other assembly work operations.

These impact presses are different from the conventional Fly Presses and Arbor Presses. The impact press is a press in which the actual impact, which acts on the job, does not depend on the pressure exerted by the operator while actuating the lever. The mechanical advantage ratio achieved is more than 175. So, however lightly you pull the handle lever, the pressure that you get on the job is consistent. This leads to instant forming of the job as per your requirement and a uniform finish.

IMPACT PRESSES operate at a speed of two strokes per second & hence are ideal for assembly line operations.

In case of the PNEUMATIC IMPACT PRESS MODEL, both hands of the operator remain free for feeding the job into the impact press, thus enhancing his/her productivity further. Moreover, the pneumatic impact press model can be operated manually as well. So, in case of power failures, your factory’s production is not hampered.

You can also adjust the striking pressure in the impact press as per your requirement up to a maximum of:
1.1 ton in case of I.P.-1100
3.5 ton in case of I.P.-3500
5.5 ton in case of I.P.-5500

 

Technical Specifications
TECHNICAL
DETAILS
I.P.-1100
Hand Operated
Impact Press
I.P.-1100
Pneumatic
Impact Press
I.P.-3500
Hand Operated
Impact Press
I.P.-3500
Pneumatic
Impact Press
I.P.-5500
Pneumatic
Impact Press
Max. Adjustable
Striking Load
1.1 ton 1.1 ton 3.5 ton 3.5 ton 5.5 ton
Total Height of Column

Diameter of Column
600 mm


36 mm
800 mm


36 mm
1100 mm


60 mm
1100 mm


60 mm
1400 mm


100 mm
Working Surface
of Base
200 x 160
mm
200 x 160
mm
260 x 220
mm
260 x 220
mm
240 x 240
mm
Throat Centre Distance 141 mm 141 mm 198 mm 198 mm 178 mm
Max. distance between punch
& base
285 mm 285 mm 610 mm 310 mm 400 mm
Collet Bore 10 mm 10 mm 14 mm 14 mm 20 mm
Max. thickness
that can be punched
M.S.
20 S.W.G 20 S.W.G 16 S.W.G

16 S.W.G

14 S.W.G

Brass, Al, Copper

18 S.W.G 18 S.W.G 14 S.W.G 14 S.W.G 10 S.W.G
 
 
 
Address:
206, Alpine Industrial Estate,
Marol Millitary Road, Marol,
Andheri (E), Mumbai-400 059. INDIA
Telphone No:
(00) (91) 22 2920 6910
Telefax: (00) (91) 22 2920 6754
Mb.:+91 92233 05545, +91 98213 76859
Email:
sales.benchmark63@gmail.com
vishvanindustries@gmail.com
 
 
┬ęCopyright 2014 Benchmark.